
Sweep
Soot and stage-one creosote brushed out with drop cloths and a vacuum at the hearth.
Woodinville sits somewhere between tidy suburban streets and open acreage dotted with wineries, and its chimneys mirror that split, masonry flues on the older homes, metal stove-pipe runs on the newer rural lots, and gas fireplaces in the newer subdivisions. Months of steady Pacific Northwest rain do quiet damage to crowns and flashing, and the wood-burning on the semi-rural edges stacks creosote faster than a once-a-year visit was meant to handle.
On the acreage and semi-rural edges, wood stoves carry the winter heat, and that steady burning loads creosote into the flue well past what an annual cleaning was designed to clear. The November-through-March rain works down through cracked mortar joints and worn flashing, and if the crown has shifted even a little, water tracks into the chimney before you ever notice a dark ring on the ceiling. Older unreinforced brick or stone masonry also carries a seismic question that a visual sweep should flag while up there. On the newer subdivision side, gas fireplaces are the standard, but the masonry chase still needs an interior look. And on the open lots, an uncapped flue is an open door for a crow or a squirrel to nest for the summer.
Fill out the request and one local chimney company covering your town calls or texts back.
Woodinville and the surrounding neighborhoods.

Soot and stage-one creosote brushed out with drop cloths and a vacuum at the hearth.

Level I through III, camera down the flue, photos of what the liner, crown, and flashing actually look like.

Tar and glazed stage-two and stage-three creosote taken out with rotary tools and treatment.

Cracked stacks, failed mortar joints, damaged crowns and caps, rebuilt or repointed back to weather-tight.

Stainless steel liners sized to the appliance, for cracked clay liners or conversions to gas.

Factory-built pipe systems, chase covers, and rusted sections on newer homes and manufactured housing.

Stainless caps and screens that keep rain, birds, and fir needles out of the flue year-round.

Breathable vapor-permeable repellent on exterior brick, stops absorption without trapping moisture inside.

The metal seal where chimney meets roof, lifted or rusted sections replaced and tucked in.

Repointing, spalling brick replacement, tuckpointing, and stack rebuilds on older chimneys.

Burner, pilot, glass, and vent checks on gas fireplaces and inserts before the season.

Where the water is getting in, crown to flashing, traced and sealed at the source.

Birds, squirrels, and raccoons removed from flues, plus the cap that keeps them out.