
Sweep
Soot and stage-one creosote brushed out with drop cloths and a vacuum at the hearth.
Newcastle sits on a hillside between Bellevue and Renton, and the housing you see there is mostly newer ridge subdivisions with gas fireplaces built into young, well-sealed walls. The chimneys are short in history but still get hit by the same Pacific Northwest wet season that chews on crowns and flashing year after year.
Because most of Newcastle's homes are newer ridge builds, the fireplace is typically a gas unit with a metal flue liner rather than a traditional masonry stack. That shifts what a sweep actually checks: the cap, the flashing where the pipe meets the roof, and the liner's integrity matter more than decades of soot. The October-through-March rain still does its work, though. Water sneaks under a loose flashing, wicks behind the crown, and by the time you notice a ceiling stain or a draft in the room the damage has had a few months to set in. And because a lot of these newer builds come with a small exterior cap or none at all, a raccoon or a pair of sparrows can turn an open flue into a nesting project before spring rolls around.
Fill out the request and one local chimney company covering your town calls or texts back.
Newcastle and the surrounding neighborhoods.

Soot and stage-one creosote brushed out with drop cloths and a vacuum at the hearth.

Level I through III, camera down the flue, photos of what the liner, crown, and flashing actually look like.

Tar and glazed stage-two and stage-three creosote taken out with rotary tools and treatment.

Cracked stacks, failed mortar joints, damaged crowns and caps, rebuilt or repointed back to weather-tight.

Stainless steel liners sized to the appliance, for cracked clay liners or conversions to gas.

Factory-built pipe systems, chase covers, and rusted sections on newer homes and manufactured housing.

Stainless caps and screens that keep rain, birds, and fir needles out of the flue year-round.

Breathable vapor-permeable repellent on exterior brick, stops absorption without trapping moisture inside.

The metal seal where chimney meets roof, lifted or rusted sections replaced and tucked in.

Repointing, spalling brick replacement, tuckpointing, and stack rebuilds on older chimneys.

Burner, pilot, glass, and vent checks on gas fireplaces and inserts before the season.

Where the water is getting in, crown to flashing, traced and sealed at the source.

Birds, squirrels, and raccoons removed from flues, plus the cap that keeps them out.