
Sweep
Soot and stage-one creosote brushed out with drop cloths and a vacuum at the hearth.
Tukwila is a small commercial core wrapped in hillside residential pockets, and most of the homes were built in the fifties and sixties with a masonry chimney that has been doing the same job for six or seven decades. The long wet Pacific Northwest season works on crowns, flashing, and mortar joints, and it shows up in a lot of these chimneys.
The hillside neighborhoods around the commercial center are where most of the residential chimneys live, and a lot of them are original to the house. That means brick and mortar laid in an era when caps and crowns weren't always finished the way they are now, which leaves room for an animal to nest in the flue or for water to find a hairline seam in the crown. If you burn wood through the cold stretch, creosote packs on faster than it would on a gas log set, and the older unreinforced masonry also raises a seismic question that a sweep can flag with a visual check before it becomes a bigger conversation.
Fill out the request and one local chimney company covering your town calls or texts back.
Tukwila and the surrounding neighborhoods.

Soot and stage-one creosote brushed out with drop cloths and a vacuum at the hearth.

Level I through III, camera down the flue, photos of what the liner, crown, and flashing actually look like.

Tar and glazed stage-two and stage-three creosote taken out with rotary tools and treatment.

Cracked stacks, failed mortar joints, damaged crowns and caps, rebuilt or repointed back to weather-tight.

Stainless steel liners sized to the appliance, for cracked clay liners or conversions to gas.

Factory-built pipe systems, chase covers, and rusted sections on newer homes and manufactured housing.

Stainless caps and screens that keep rain, birds, and fir needles out of the flue year-round.

Breathable vapor-permeable repellent on exterior brick, stops absorption without trapping moisture inside.

The metal seal where chimney meets roof, lifted or rusted sections replaced and tucked in.

Repointing, spalling brick replacement, tuckpointing, and stack rebuilds on older chimneys.

Burner, pilot, glass, and vent checks on gas fireplaces and inserts before the season.

Where the water is getting in, crown to flashing, traced and sealed at the source.

Birds, squirrels, and raccoons removed from flues, plus the cap that keeps them out.