
Sweep
Soot and stage-one creosote brushed out with drop cloths and a vacuum at the hearth.
North Bend sits at the foot of the pass, and its housing tells two stories at once: an older downtown of masonry homes with thick brick-and-tile chimneys, and newer subdivisions with metal stove-pipe systems and gas fireplaces. Either way, the town goes through more wood smoke than almost any other corner of King County, and the chimneys show it.
More smoke means creosote builds up faster on the flue walls, and the wet season doesn't help. Rain and snow work their way past a worn crown, seep into mortar joints, and rattle loose the flashing where the chimney meets the roof. The older downtown masonry was laid without modern reinforcement, so in a seismic zone a hairline crack can widen season after season. On the newer side of town, a metal stove-pipe that has never been swept can smell like it is burning the day it is lit, and a gas fireplace that has been idling through a mild fall often throws a fault code when the cold actually sets in. An uncapped flue left open through a long winter will collect raccoons and birds before you notice.
Fill out the request and one local chimney company covering your town calls or texts back.
North Bend and the surrounding neighborhoods.

Soot and stage-one creosote brushed out with drop cloths and a vacuum at the hearth.

Level I through III, camera down the flue, photos of what the liner, crown, and flashing actually look like.

Tar and glazed stage-two and stage-three creosote taken out with rotary tools and treatment.

Cracked stacks, failed mortar joints, damaged crowns and caps, rebuilt or repointed back to weather-tight.

Stainless steel liners sized to the appliance, for cracked clay liners or conversions to gas.

Factory-built pipe systems, chase covers, and rusted sections on newer homes and manufactured housing.

Stainless caps and screens that keep rain, birds, and fir needles out of the flue year-round.

Breathable vapor-permeable repellent on exterior brick, stops absorption without trapping moisture inside.

The metal seal where chimney meets roof, lifted or rusted sections replaced and tucked in.

Repointing, spalling brick replacement, tuckpointing, and stack rebuilds on older chimneys.

Burner, pilot, glass, and vent checks on gas fireplaces and inserts before the season.

Where the water is getting in, crown to flashing, traced and sealed at the source.

Birds, squirrels, and raccoons removed from flues, plus the cap that keeps them out.