
Sweep
Soot and stage-one creosote brushed out with drop cloths and a vacuum at the hearth.
Covington sits on the south plateau of King County, and the homes here are the subdivisions that filled in from the late 1980s through the 2000s. Most of those fireplaces run on gas, and the flue systems are either short metal liners or the standard masonry stacks that came with those builds.
A lot of Covington homeowners first notice a chimney problem in October, when the first real rains start hammering the crown and the flashing where the stack meets the roof. Water works its way behind mortar joints, and by spring there's a damp spot on the drywall or a streak of white residue on the exterior brick. Because the flues are shorter than on older, taller masonry stacks, an open or cracked cap lets in birds, squirrels, and the occasional wasp nest that blocks the draft in a single afternoon. On a few of the newer builds the stove pipe runs straight through the attic to the exterior wall, and those connections loosen a little every winter, letting a faint smell of unburned gas seep into the room before the pilot even lights.
Fill out the request and one local chimney company covering your town calls or texts back.
Covington and the surrounding neighborhoods.

Soot and stage-one creosote brushed out with drop cloths and a vacuum at the hearth.

Level I through III, camera down the flue, photos of what the liner, crown, and flashing actually look like.

Tar and glazed stage-two and stage-three creosote taken out with rotary tools and treatment.

Cracked stacks, failed mortar joints, damaged crowns and caps, rebuilt or repointed back to weather-tight.

Stainless steel liners sized to the appliance, for cracked clay liners or conversions to gas.

Factory-built pipe systems, chase covers, and rusted sections on newer homes and manufactured housing.

Stainless caps and screens that keep rain, birds, and fir needles out of the flue year-round.

Breathable vapor-permeable repellent on exterior brick, stops absorption without trapping moisture inside.

The metal seal where chimney meets roof, lifted or rusted sections replaced and tucked in.

Repointing, spalling brick replacement, tuckpointing, and stack rebuilds on older chimneys.

Burner, pilot, glass, and vent checks on gas fireplaces and inserts before the season.

Where the water is getting in, crown to flashing, traced and sealed at the source.

Birds, squirrels, and raccoons removed from flues, plus the cap that keeps them out.